Replay

Home & Trime

Home & trijme interior emulsion.

 

 

 

 

 

 

HOME & TRIME

Premium Interior Luxury Emulsion

Description

 Home and Trime Luxury Emulsion is a superior quality interior emulsion with improved coverage and finish. It gives luxurious look and smooth, blemish-free finish to your walls. Being 100% acrylic emulsion, it has an excellent application properties and its acrylic resin content enhances durability and reflectance. Hence, provides greater decorative appeal to your wall and make it look fresh long years later.

 It has been specially formulated for use on interior surfaces with low VOC (Volatile Organic Compound) offering environmental friendly reputation.

Usage

Home and Trime Luxury Emulsion is ideal for all normal interior masonry surfaces including brickwork, plaster, cement and wallboard.

Features

- It is a tough and long-lasting paint with soft, rich sheen and excellent hiding

- It has better stain resistant properties and possesses superior wash ability.

- Prevents growth of algae and fungus.

- Anti-bacterial

- Excellent adhesion to the surface

Particulars

Pack Size

Available pack sizes are

1Ltr

4 Ltr

10Ltr

20Ltr

 

Practical Coverage

A guide to the practical coverage which can be achieved
under normal conditions is
 280-320 sqft /Ltr./coat.

No. of Coats

2 or more coats can also be applied for more sheen and smooth result.

Film Thickness

60 micron

Thinning

Brush: 400-450 ml of water in 1ltr paint.

Spray: 650-700 ml of water in 1ltr paint.

Finish

Sheen

Application Details

Recommended Tools

1.Brush
2.Roller
3.Spray

Cleaning Up

Clean all equipment with water after use.

Drying Time

Surface Dry:- 25 – 30 Minutes

Full Dry:- 4 – 6 Hours 

Drying times may vary depending on temperature, humidity, atmosphere and film thickness.

Surface Preparation

New, bare, old or previously painted surfaces must be clean, dry and free from loose paint, dust or grease, fungus. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. For large holes and cracks, use ACC wall putty(Cement Base). Allow to dry. Apply always cement primer WT(Interior) or Kalash Cement Primer WT(Interior) in order to seal the surface from water and salts. Allow surface to dry completely. Now the surface will be smooth and ready for home and trime luxury emulsion to be applied.

Application Instructions

-Stir the paint thoroughly before use for the best result.

-Paint should be diluted as per the specification(500ml/Ltr)

-Over dilution will lead to the capacity being lower than expected.

-Allow at least 4 to 6 hrs for drying between coats.

-Roller application provides a smoother and richer finish if required.

Storage and Handling

Storage

Container should be stored in cool place away from heat.

Flash Point

Water Based paint, Non-flammable

Stability of thinned Paint

Use within 24 hours

Shelf Life

5 years from date of manufacture in original tightly closed container away from the direct sunlight and excessive heat.

Jasmine Paints Pvt. Ltd.
Bharatpur - 4, Lanku, Chitwan, Nepal,
Tel: +977-56-526540, 531445
P.O. Box: 48, Fax- 00977-56-531445
Toll Free: 1660-565-1010
Email: jasminepaintsnepal@gmail.com

copyright © 2019 all rights reserved.           Powered By: coconutcreation
Find us on facebook Find us on instagram Find us on youtube Find us on instagram